Tamaki Sailing Dory
"Aquarius"

16' x 4'7"

Designed by Pelin Plans, of NZ, along traditional lines but incorporating modern materials, the dory is designed for easy steering and can be rowed effortlessly for hours. The hull shape also lends itself to sailing and has a rig designed specifically for the Tamaki. Can also be powered by a small outboard or inboard engine.

Aquarius has just been refurbished so is in good condition overall. She comes with a set of oars, lifejackets, sails and trailer.

$3,500

Ref No: FS 10-177

Marples SeaClipper 5M Trimaran
"Piaf"
16' x 11' x 12"

The longer 2 seat version of the untippable 3 metre trimaran is a dream to sail. Bote-Cote Epoxy/Ply stich and glue hulls. Dual steering and sail controls and kick-up rudder and centreboard ...and she folds up for easy trailering!

Anyone can sail these boats from beginner to the seasoned salt! Point her and she'll go and go.

Built by Duck Flat, and delivered Sep 2002, only been used a dozen times and
in absolutely brand new condition. Always kept undercover. Comes with 2hp four stroke Honda outboard with only approx 4 hours running time.

Geniune reason for sale.
At less than half the cost of a new boat, priced to sell.

$7,750 neg

negotiable price without the motor

Ref No: FS 10-176

Hartley Half Cabin
"Gecko"
16'

Hartley 5.18 metre halfcabin bondwood ready to go out get those big fish.

25H.P Evinrude outboard, 12volt electric winch, radio cd player, marine radio, echo sounder, hin number, all in good condition, on trailer and tows well.

Gecko has been at the Goolwa Wooden Boat Festival. Housed at Pt Clinton on Yorke Peninsula.

Regretable sale but must sell for needed shed room.

$5,000 SOLD!

Ref No: FS 10-175

Basset Rowboat
"Liz"
18' x 2'11" x 6"

‘Liz’ is the classic, wine glass transom, one + passenger seat, recreational sliding seat rowing boat – designed by Ken Basset and built from plans acquired from Duck Flat Wooden Boats.

The various construction shots show the 4 mm Gaboon ply lapstrake (clinker) planks – individually shaped and epoxy glued, details of stem and transom, the fittings (sliding seat, foot rest, passenger seat etc).

There are also several shots of the launch of ‘Liz’, everybody impressed with the design and build quality.

“Liz’ is configured like a racing shell – with seat, riggers, foot rest all at the correct height and position – supplied by a top racing boat builder. It’s just that the hull is a lot more stable and easy to row. It is a beautiful, classic, recreational rowing scull that will give years of pleasure (and very good exercise too).

The builder, unfortunately, has to make way in his boatshed for the next two boats (a smaller lightweight recreational scull and also a WRC strip plank tender for his recently completed, David Payne designed 7 m Day Yacht).

$8,200 SOLD!

Ref No: FS 10-174

Riverboat
"Emma-Jane"
19'6" x 6'6"

Beautifully finished Carvel hulled riverboat is epoxy sheathed and sealed.

She is powered by a twin cylinder 8HP Stuart Turner with electric start.

Emma-Jane sports polished decks, two tone timber interior and upholstered settees in the cockpit. Exquisitely finished throughout.

Full covers provided.
Dual axle trailer.

$25,000

Ref No: FS 10-173

Classic Vintage Thames launch
"Zitania"
36'

Imagine cruising effortlessly down the river in one of the finest and oldest classic boats on the Murray. Now possible as Zitania is for sale after 41 years in one ownership.
Built circa 1890.
Brought to S.A. from UK in 1908.
Draft 2’8’’ Carvel Construction.
Fitted with gas detector, air horn, 3 way fridge, depth sounder, UHF Radio, CD player/ Radio, automatic and manual bilge pumps.

Powered by 28 hp Yanmar Diesel - 780 hrs
Timber panelling and brass work throughout

Accommodation:
Forward - saloon;
Midships- Helm, galley, head, engine (under table);
Aft –cabin - seating and second table that is convertible to double bed.
Drop canvas sides with clear vision panels.
Large aft deck over counter stern, with second helm position.
Zitania sleeps 4.

Full 120 year History and photographic record available.

The new owner will be the next custodian of a special boat and must therefore be committed to the preservation of her ongoing place in history.

$47,250

Ref No: FS 10-172

5.5metre Racing Yacht
"Kirribilli" KA3
5.5m

Built by the RSYS in 1955 for the 1956 Melbourne Olympics .Long history of successful sailing. Designed Jan Lingt.
All receipts and plans from original build and photos .All original sails and fittings.

Hull splined and glassed, new decks, new rigging, mast restored and repainted inside hull epoxied and painted Yard Jinker, tandem trailer with breakaway brakes .Requires final fairing, fiitings refitted, paint and standing up the rig.

This is the real article and offers a lifetime opportunity to get an original serious race boat restored sympathetically to very high standards, ready to be used for another 60 years and the world 5.5m Championships coming to Australia in 2012

Offers for purchase +$26k or Syndication considered.
Possible to be finished in Duckflat Workshop.

Ref No: FS 09-171

24ft Nor Easter
"Duckit Apps"
24'

Completely refurbished and epoxied inside and out Redesigned by Michael Storer 2006.

Just repainted in our workshop and antifouled November 2009

Carbon Kevlar sails and very competitive yet simple to sail and easily handled (2 handed).

Won last two races since re launched both scratch and handicap

It's a boat builders boat with a self draining cockpit, built strong and comes with tandem trailer and yard jinker, 2 kites (one asymmetric)

Draws 900m, sailed throughout Goolwa low water period.

3h.p outboard also Yacht club berth at Goolwa available $8200

My boat and sailed every Friday likes beating modern plastic boats and regularly does.

$7500 Located Adelaide

Ref No: FS 09-170

Hartley Trailer Sailer
TS 16
16 x 6'

Fully equipped, completely restored in 2004 By Duckflat.
Full epoxy coating and glassed and faired hull used twice as clients have headed in a different direction. A trully better than new TS 16.

Ready for summer Cruising with the family. Requires small motor only.

$9,500 Located Adelaide

Ref No: FS 09-169

Atkins Bruce Conklin Rowboat
"Lily"
15'6" x 3'10"

Beautiful rowboat designed by Williams Atkins in 1943. Lily will turn heads while you out taking in the air and getting some exercise or rowing to your favourite fishing spot.

The clinker hull is exquisitely built in hoop pine ply (epoxy saturated and sheathed to waterline) with varnished Celery pine seats.

Lily has Oregon floors and a wine glass King Billy transom, 3 pairs of spoon blade oars and Douglas bronze rowlocks.

She sits on a custom galvanized trailer and is fitted custom waterproof cover.
Located Port Sorell, Tasmania.

$8,000

Ref No: FS 09-162

Hartley Trailer Sailer
River cruiser conversion
"Sinami"
21'

Cruise your favourite waterways ...NOW! Don't wait for spring, this little beauty is ready to go.

Hull professionally sheathed by Duck Flat 1998 using Dynal fiberglass.
2 pack paint to all surfaces.
316 Stainless handrails and above cabin rails.
Powered by 1998 Yamaha 9.9 4-stroke high thrust long leg outboard remote controlled - Very economical cruising at half throttle - 10 km.ph.
Spare propellor, steel fuel tank – approx 50ltr.
Quick connect helm controlled steering.
100 amp sealed battery with 800 Watt Solar backup.
LED lighting throughout cabin and Navigation lighting.
Lockable cabin and shower alcove.
Inbuilt galley with plumbed sink, 90 lt Nec fridge with invertor 12v/240 v & portable gas cooker, storage under with drawers.
Shower/toilet alcove with pump and draining floor.
Built–in drop down bunks and ample storage above and under floor.
Cushions to seats and bunks, drawers under sink.
Demountable table for galley and vinyl curtains and screens to rear deck area. Clear view to stern.
Life jackets x 3, fire ext., paddle, anchor and line, inshore flares, mooring lines x2, Ladder and landing plank.

Registered fully galv. tandem axle trailer 2000Kg, new light truck tyres and alloy rims, hydraulic override brakes, LED lighting and winch-all new, ready to go.

Boat is available separately if trailer is not required.

$15,000 for package or

$12,000 less trailer SOLD!

Ref No: FS 09-166

Putt Putt
"Lindy Lou"
15' x 5' 3"

Built in 1948 and restored by the second owner in 1993.

All ribs replaced, fully stripped to bare timber and repainted with the highest quality paint and varnish. New beech decks and floor.

Auto bilge pump, radio, new 20L aluminum fuel tank, button start Simplex 4 stroke motor, nav lights. 12 x 12 propeller, new 1’ stainless steel shaft and boxes in and out. Starts 1st time and runs beautiful. A joy on the water.

New Dunbier trailer and more. To build a similar boat today, if you can find the timber, would cost $40,000.

$22,00 Reduced Must go

Ref No: FS 09-164

Green Island Skiff
15' x 5'6"

The boat is marine ply (6mm topsides gaboon, 9mm bottom pacific maple)
with hoop pine frames all Bote Cote epoxied and finished in International Brightsides marine enamel.
She is water ballasted (approx 100lbs weight)
All Brightwork (Except mast & spars) have been epoxied and coated with 8 coats of marine varnish
• Centreboard cap, King plank, and transom stiffner are New Guinea Rosewood
• Gunwales are Mountain Ash
• Coakpit Combing is laminated Cedar marine ply
• Tiller handle laminiated Hoop Pine & Red Cedar
• Mast & Spars are of Douglas Fir and have been oil finished

The trailer is galvanised (Felk brand) it has 12" bearing mount wheels with new bearings and bearing buddies. It was a smaller trailer that has been modified to suit and works brilliantly. Rego till Oct 09
She comes with 7' oars and rowlocks are included but no motor (Although it works really well with a 2 hp outboard), can include a couple of basic life jackets and a sand anchor
Sails are a main and jib as per the plans.

Located at Richmond which is about an hour west of Sydney

$4000 SOLD!

Ref No: FS 09-161

Bayview 23 - Half Cabin Launch
"Argo"
23' x 7'8"

Yes I know its not wooden but it is a great boat and the client now has a Mundoo, we can only help and if it gets you on to the water with this much style its hard not to agree.

Built by Cottee Marine Yamba NSW, in moulded solid fibre glass with a forward cabin with two berths, portable toilet, alcohol stove and sink. The spacious open cockpit is 2.6m x 1.95m internal (8ft 8in x 6ft 6in). Seats all round and the engine cover makes convenient table. Steering by tiller at the stern.

Powered by an Inboard 2 cylinder 636 cc Yanmar diesel (Total hours on engine 130) that's had regular servicing. 100L bladder fuel tank.

• Fresh water storage nominal 60L in bladder tank.
• Removable canopy; storm cover for cockpit.
• Bunk and seat cushions
• Navigation lights; riding light on removable pole.
• Battery charger and external 15A power connection, with connection to internal 240 V power outlet.
• Original battery replaced with 12 V 90 AH gel battery.
• Transceiver 27 MHZ and antenna.
• Digital battery and charge meter.
• 2 marine deck lights.
• Navman depth sounder.
• Horn.
• Existing bilge pumped re-wired to operate when battery isolating switch is OFF.

Just undergone completetidy up and antifoul at our yard in Adelaide ready to go straight back in.

$35,000

Ref No: FS 09-160

Duck Flat Mundoo Electric River Cruiser
"Nomad III"
34'9" x 7'8" x 1'8"

A totally unique SOLAR POWERED wooden cruiser - construction completed late December 2004, launched 9th January 2005.
Featured in the American 'Wooden Boat' Magazine - July/August 2005 and the' Australian Amateur Boatbuilder' Magazine - March 2005.

Low impact and environmentally friendly & very economical, this vessel has been titled 'the first of her kind on the Murray River, and possibly anywhere in the world'.

• 12hp ETEK Repm permanent magnet max 3200 rpm 3: 1 reduction belt drive to 16" brass propeller.
• Six x 185W Monocrystalline Solar Panels - (11 OOW) Auxiliary generator - Honda 2 kw - inverter type Bow Thruster - 2kW, 12v
• Gas hot water service to Galley and Shower 4 Berth - 2 rear cabin 2 forward in Vee berth
• Unique 3 filter + 'Seagull' water purification system, delivering pure drinking water to a faucet in galley and filtered water to rest of boat. 110 litre Electric Freezer and fridge on retractable roller ,system, providing ample perishable storage for up to 3 weeks.
• Separate enclosed Shower and toilet.
'• Black and Grey' water storage capacity of 450 litres with single discharge outlet compliant with any Murray River effiuent station fitting. Comfortable high density foam bunks and seating, all with high quality water proof coverings.
• Extensive drawer and cupboard storage, together with hatches to all bunks / seats - providing further storage for clothing and oddments.
• Eight x 6 volt Deep cell sealed (lead acid) gel batteries- 300AH + 1 x12V - 75AH for 'house 'power
• Turbo Kool evaporative air conditioner 12V Television and DVD - 240 V-via inverter
• Gas Oven Grill and stove - (3 burner), plus rotisserie Stainless Steel BBQ (Gas) - rear deck
• Access panel in rear deck to Propeller
• Self-draining rear deck

$130,000

Ref No: FS 09-159

Fife Clipper Bowed Motor Launch - "Brynhild"
38'6" x 8' x 3'3"

Built in Devonport 1905 by Harry Wood - designed by famed Scottish designer William Fife. Beautifully restored. Sleeping accommodation and galley is provided in the forward cabin leaving large open entertaining and seating areas in the aft cabin. Powered by a 18 h.p. Lister 3 cylinder air cooled diesel engine (virtually no hrs) - Ideal for electric motor installation. A very elegant vintage launch and real head turner - cruise in Victorian style

$59,500 Reduced must be sold

Ref No: FS 08-152

Kaufman 38
38''

This mostly fitted out new Kaufman designed yacht is up for grabs. Most of the hard work is done, even the hull is painted. She just need the fit-out finished.

The hull is stirp-planked in cedar/fibre glass/epoxy. Interior fit is in ply/epoxy and neatly finished with not much construction left to do.

She comes with an M50 Perkins Diesel engine, mast, rigging, Ray Brown sails, furlers, stove. The Kaufman 38 sleeps 4.

SOLD!

Ref No: FS 08-150

Gondola Business

A rare opportunity!

Operates on Lake Torrens Adelaide
2 gondolas fully kitted out restored and rebuilt by Duck Flat with Bote Cote epoxy (only venetian gondolas in Australia)

• spare oars, forcolas and front forcolas
• specially made gondola trailer
• sponsorship with Hardy's Wines
• web site >>>
• gondola brochures and template
• assorted t shirts, glasses, picnic baskets, etc
• business name

Prospective buyer would need obtain their own liquor licence.

104,000

Ref No: FS 08-149

Crosby - Catboat
"Qiany 11"
16'6" x 8'

She was professionally built in cold molded Australian cedar with inner skin of Ash.The mast, boom and gaff are straight grain hollow spruce. Tan terylene sail with reefing points. Bronze and heavy chromed fittings. Timber blocks with bronze sheaves.2hp Yanmah outboard.

The craftsmanship is of the highest order as an inspection will confirm.

$19,500

Ref No: FS 08-146

Storer Sailing Canoe - Beth
15'6" x 32"

Fast and rewarding boat to sail very well built, comes with trolley for launching, easily cartopable.

Beth is built as per plan with a construction variation of a strip plank bottom and roller blocks on the downhaul. The ply is gaboon, framing timber is cedar and the spars and foils are oregon. The centerboard has had about 15 inches docked off due to local conditions (shallow lake) though still sails very well and has a varnish only finish, as has the rudder .

Cream Sails are KA and in good condition, there is a small rust stain on the mizzen. Located Sydney

$3,750

Ref No: FS 08-145

Oughtred Canoe - Bub's Kirk
12’3" x 2'4" x 11 ”

Beautifully finished by professional woodcraftsman, Pete McCurley, to Iain Oughted's plans. Clinker planked in painstakingly sought out salvaged Californian Redwood.

Stems and cutwaters carved from natural grown teatree crooks. Silver Ash framing, decks and gunwales. Copper rivets and roves.

Also has custom cradle for car topping, removable seat and custom single bladed paddle.

$10,000

Ref No: FS 08-144

Bolger - Old Shoe
"Wee Dumpy"
11’1” x 5”1” x 1’3”

A good home needed for a Cat rigged yawl ballasted day sailer.

Constructed from marine grade plywood (6 mm) on oregon frames, fastened with stainless screws, epoxy and glass tape. Glass sheathed hull (200lbs lead ballast) and finished with two pack. Wee Dumpy's well finished and thoroughly coated. Oregon spars.

Sails four comfortably. Excellent Boat for shallow water sailing, extremely
stable for fishing. Has a big boat feel and handles well. Comes with
galvanised trailer, outboard (Yamaha 2.5 HP, 4 stroke.), anchor and rope,
fenders, windex, lines, and more. Lots of storage area on board for eskies
and other gear. Built in foam and inflatable buoyancy. See inventory.

She sails well at 10+ knots of wind points high and has little leeway and surfs easily on a run being clocked 7-8+ knots, well above her hull speed. Just the thing for lakes, rivers and other closed waterways.

SOLD!

Ref No: FS 08-142

Catboat
"Edward John"
4.5 x 1.8 x .35m

This nicely turned out Catboat is built in cedar strip and beautifully finished

Edward John's set up for shallow water cruising ideal for lakes, rivers, etc
Virtually brand new well finished and ready to go straight away.

All gear and 4h.p johnson outboard motor.

Very good new galv trailer Located in Adelaide

SOLD!

Ref No: FS 08-140

Bolger Bobcat
"Great Saint Joseph"
13'5 1/2 " x 6'

This is a modified version of Phil Bolger's Bobcat. Built in 2001-2
using the WEST system. Sails and tracks well in light and heavy conditions.

Modifications are:
* LOA increased to 13’ 5½” (4.1m)
* Sheer flattened slightly from the original
* Sunken deck
* Swing centreboard replaced with a dagger board
* Cat rig replaced with a boomless gaff rig.
* Provision for water ballast—-about 140 lbs for single handling
in heavy weather
* Rowlocks and moveable rowing seat
* Airtight buoyancy fore and aft and in side tanks

She comes with oars, paddle, Danforth anchor and plastic lift pump for filling and evacuating then water ballast tanks when needed, mainsail, jib and storm mainsail. And she'll sleep two young and flexible people!

Great St Joseph sits on a registered Dunbier trailer.

$5,750

Ref No: FS 08-139

Oughtred Acorn Skiff
11'9" x 3'11"

One of Ian Oughtred's beautiful traditional style sailing dinghies. She's sweet and slippery and rows and sails like a dream. She also tows well so would also make a great tender. Very versatile.

Traditional build in Huon Pine. Very well finished and meticulously built with grown knees and solid Huon Pine planking . Good reg trailer.

Just come and smell it!

$8,000 or offers Adelaide

Ref No: FS 08-138

Young 6.7 Trailer Sailer
6.7m

This trailer sailer is In very good condition and ready for racing and cruising
Lots and lots of room for a trailer boat.

She's has main and smaller mainsail, genoa and storm jib. Her engine is a 9.9 Mariner, with electric star,t and comes with a new battery which charges while it's running. There's an ice box with hand pump (for emptying), 50lt fresh water tank (with deck filler), S/S sink with fresh and salt water, Port-a-potty with saltwater hand basin in head. She also has a 2 piece heavy duty cover.

Her trailer is Young designed with over-ride brakes (new brakes and hubs).

She's fully equipped and the holidays are here.

Go Sailing today!

SOLD!

Ref No: FS 08-131

Ocean Cruiser
"MV Joanne "
42' x 13' x 4'

"MV Joanne" - Historic, Huon Pine Flybridge Cruiser. It would be hard to think of something more enjoyable than a river or sea cruise on the "MV Joanne". The 42' Twin Diesel, live-aboard cruiser has a well equipped galley and can sleep five. Full history and current survey available. Recently had a full repaint, the "MV Joanne" is currently berthed at Mannum. This unique boat is reluctantly for sale after nearly 12 years with the current owners.

Recenly anitfouled and repainted topsides.
Full EPA waste water compliance.

See attached History and Specs

SOLD!

Ref No: FS 08-130

Bolger Fantail Launch Cruiser
"Lady B "
26' x 6'3" x 2'3"

Here is a beautiful example of Phil Bolger's Fantail Launch exquisitely built and finished. The ideal day cruiser.

She's constructed in kapur, strip plank poplar and epoxy then painted with bright trim inside and out. Fully upholstered and carpeted with new clear roll up sides for comfy warm cruising all year round.

Powered by a Kubota 18hp 3cylinder diesel ZF ZF gearbox/shaft drive with approx. 40 hours.

Comes complete with Miegel purpose built tandem trailer with disk brakes.

Lady B is in as new condition so she'll turn heads where ever she goes.

$49,000 Adelaide

Ref No: FS 08-124

Roberts Spray 22
24' x 7'10" x 2'6"

Here we have a beautifully built hull! The exterior is ready to paint and the interior ready for fitout. The finish inside is exquisite and all epoxy sealed. The hull has been cold molded with epoxy, cedar strip planked over diagonally planks on sawn/ply reinforced frames and stringers. Light and strong.

The hard work is done, the fitout is the easy bit.

She comes with plans and an aluminium mast.
These cruisers sail well and have plenty of room.
Plans have either gaff or bermuda rig.

$7,000 Adelaide
Ref No: FS 05-51

A charming little character boat packed with versatility for it's 18 feet.

The semi-displacement hull is built from Pacific Maple marine ply on Hoop Pine frames and fully glassed all with BoteCote epoxy. Extra strong and stiff. She's been professionally painted, fitted with silicon bronze fastenings and has FlexiTek decking.

The Bo-Jest is powered by a Beta Marine 13.5hp inboard which cruises at 8knots and using only 1ltr/hr in fuel from her twin tanks carrying 90ltrs. the engines only done 100hrs.

Her cabin has full head room with 2 single berths and a loo below. She's fitted with an electric winch, nav lights, radio/cd, depth sounder/fish finder, 2 batteries, 2 bilge pumps and comes with a full wiring plan (wired by a marine electrician).

Bo-Jest comes on a custom trailer, with brakes and spare, and can be launched by a single person. And at no extra cost she also comes with a rubber ducky and boat cover. All receipts and pics available.

She's in mint condition and will turn heads and give hours of pleasure wherever she goes.

SOLD! Well worth viewing Located QLD, Isle Of Capri

Ref No: FS 07-111

Hartley Cruiser
24' x 8'

A recently restored old classic cruiser from the 70s.

She's powered by a 1800 Volvo Penta stern Drive (inboard/outboard), and very efficient, with a Johnson auxiliary outboard mounted on the transom.

The cabin comprises of a compact galley area, with sink, storage lockers and vee berth.

Bote-Cote epoxy sealed and finished in International Yacht Paint and Goldspar Varnish.

This beautiful girl sits on her own tandem trailer and she would be just the thing for day/weekend cruises or a spot of fishing on your favorite, or yet undiscovered, waterway.

$25,000 ono Adelaide
Ref No: 06-79

Trailer Sailer - "Banana Republic"
18'6" x 6'

Just in time for Christmas! ...and a bargain to boot!

A stunning trailer sailer, similar to a Hartley TS16, ready to sail ...you could be on the water today!

Though a tad longer and narrower than a TS16, it's easier to sail and rig. She sports a bermuda unstayed boomless rig that goes up in minutes without any fuss. She light, fast, simple and has a good sailing record.

The finish is impeccable and has a comfortable cabin for a boat this size. She comes with a Johnson 4hp Outboard, galvanised trailer, anchor and paddles.

.

$8,500
Ref No: FS 05-67